South Asian Research Journal of Engineering and Technology (SARJET)
Volume-8 | Issue-05
Original Research Article
Interference Suppression Capability of the MVDR Adaptive Beamformer for Smart Antenna Systems: Effect of the Number of Interfering Signals on Null Depth, SIR and SINR
Suhail Najm Shahab*
Published : Nov. 20, 2026
Abstract
Co-channel interference limits the capacity and reliability of modern wireless and navigation systems, and adaptive beamforming with antenna arrays is widely used to suppress it. The minimum variance distortionless response (MVDR) beamformer is the standard solution, but the effect of a growing number of signals not of interest (SNOI) on a fixed array is seldom quantified in a controlled way. This study aimed to determine how the number of SNOI affects the null depth, output signal-to-interference ratio (SIR), output signal-to-interference-plus-noise ratio (SINR) and mainlobe accuracy of an MVDR beamformer. An 8-element uniform linear array was simulated with the desired user at 0°, an input SNR of 10 dB and 250 snapshots, while the number of SNOI was increased from 1 to 9 at different angles, including two seven-interferer layouts. The deepest null per scenario ranged from −54 to −70 dB, and the mainlobe stayed at 0 dB within 0.006 dB. The output SIR was 54–55 dB for one and two SNOI, decreased to 43–50 dB for three to seven, and dropped to about 22 dB for eight and nine SNOI. The output SINR stayed at 19.0 dB, the noise-limited value, up to seven SNOI and fell to 17.3 dB beyond that. These results are consistent with the N − 1 degrees of freedom of the array. An N-element MVDR beamformer can therefore be relied upon to suppress up to N − 1 interferers, which gives a practical rule for dimensioning smart antenna arrays.