Soil stabilization by combining several minerals is a form of material engineering aimed at increasing the bearing capacity of the soil to a higher level. The development of waste-based materials and the utilization of local potential are part of environmentally conscious construction. This study aims to analyses the mechanical behaviour of soil stabilized with several pozzolanic materials derived from nickel processing waste and limestone, which are local materials with very large deposits. ASTM standards were used in this study for both physical and mechanical testing. Unconfined compressive strength (UCS) tests were conducted to compare the mechanical behaviour of stabilized soil with that of natural soil. The test samples used were cylindrical with a diameter of 35 mm and a height of 70 mm. The binding materials consisted of nickel slag, aluminium hydroxide, and limestone, with the amount of each material based on the dry soil weight (γdry). The addition of lime in this study was varied at 2%, 4%, and 6%. The test results generally show that lime variations and curing time affect the increase in unconfined compressive strength (qu), with the highest value of 30.91 kg/cm² observed at 6% lime content after 28 days of curing.